Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Gear Knob of a Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Shift knob

Want to replace the gear knob of your Jeep Wrangler? Let's see how to proceed with the replacement: first, take the knob in your hands and rotate it left and right until you remove it from the gear stick. Use a plastic lever to disconnect the frame of the leather gaiter (if replacing). For the installation: fit the new leather gaiter with the clips (if removed), then take the new knob and slide it onto the stick present on the centre console: tighten the new knob until it locks onto the stick. Finally, test the movement of the stick on the centre console to ensure the knob is correctly fitted.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on a Jeep Wrangler
How to Replace the Gear Knob on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the gear knob on a Jeep Wrangler, grasp the knob and rotate it counterclockwise, using a spanner if necessary. Once the knob has been unsc…
How to Replace the Gear Knob of the Jeep Wrangler
How to Replace the Gear Knob of the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) In this brief and simple guide, learn how to remove and replace the gear knob of the Jeep Wrangler in quick and easy steps. First, get inside the veh…
How to Remove the Gear Knob of the Jeep Wrangler?
How to Remove the Gear Knob of the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To remove the gear knob of the Jeep Wrangler, you need to use a flat screwdriver. With this, detach the chrome cover located just below the gear knob…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos