Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Life Indicator on a 2016 Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

In this article, we will see how to reset the oil life indicator on the 2016 Jeep Cherokee. First, start the instrument panel, then use the left and right arrow buttons to navigate the menu until you find the vehicle section.

Navigate to the oil life indicator, once located, press the OK button and press the accelerator pedal three times. At this point, the procedure is complete.

It is recommended to perform this reset procedure only after having the service done or having the oil changed, especially if the reset was not done at the workshop.


Posted on 4 April 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Life in a 2021 Jeep Cherokee
How to Reset the Oil Life in a 2021 Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video tutorial, see how to reset the oil life in a 2021 Jeep Cherokee by following some simple steps that will allow you to manage your vehic…
How to Reset the Oil Change Light on Jeep Cherokee
How to Reset the Oil Change Light on Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video tutorial, you will see how to reset the oil change light on a Jeep Cherokee. First, perform the oil and filter change. After completing…
How to Reset the Oil Light on a 2016 Jeep Cherokee
How to Reset the Oil Light on a 2016 Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) The procedure to manually reset the engine oil light on your 2016 Jeep Cherokee is practically identical to that used on many other cars, even from d…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos