Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Filter from a Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Cabin air filter

Let's see how to remove the cabin filter installed on a Jeep Compass. Open the glove compartment and unclip the plastic guides (located on the sides of the drawer), then remove the cover of the glove compartment; pull out the cap and slide the air filter out of its housing as shown in the video. Once this operation is complete, insert the new air filter into the filter holder (be careful to insert the filter correctly without bending it). Finally, refit the cap of the box and all components of the glove compartment as they were previously disassembled.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Filter on a Jeep Compass?
How to Change the Cabin Filter on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) In this video tutorial, you will learn how to remove and replace the cabin filter or pollen filter of the Jeep Compass. First, get inside the vehicle…
Replacing the Cabin Filter on a 2018 Jeep Compass
Replacing the Cabin Filter on a 2018 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) How to remove the air filter from a 2018 Jeep Compass? Here’s how to take out the pollen air filter from inside the cover drawer. Remove the trim loc…
How to Replace the Cabin Filter on a Jeep Compass
How to Replace the Cabin Filter on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) In this video tutorial, see how to replace the cabin filter on a Jeep Compass by following simple steps: first, purchase a new cabin filter; next, ge…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos