Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Filter on a 2018 Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Cabin air filter

How to remove the air filter from a 2018 Jeep Compass? Here’s how to take out the pollen air filter from inside the cover drawer. Remove the trim located on the side of the dashboard (right side), open the glove compartment door, and remove the securing screws until the entire piece is removed. Take off the cap from the filter holder (push the plastic clip), then extract the cabin filter to be replaced. Insert a new pollen filter, ensuring it fits snugly around the walls of the box; refit the filter box cap and the entire cover drawer.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Cabin Air Filter on Jeep Compass
Replacing Cabin Air Filter on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Replacing the cabin air filter on a Jeep Compass? Let's see how to remove the air filter. Open the glove compartment, unclip the guides on the side o…
How to Change the Cabin Filter on a Jeep Compass?
How to Change the Cabin Filter on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) In this video tutorial, you will learn how to remove and replace the cabin filter or pollen filter of the Jeep Compass. First, get inside the vehicle…
How to Replace the Cabin Filter of the 2016 Jeep Compass
How to Replace the Cabin Filter of the 2016 Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) If you own a 2016 Jeep Compass and want to learn how to correctly replace the cabin air filter, carefully read the instructions below and then put th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos