Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs of the Jeep Compass 2.4L

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Spark plugs

See other generations:
Video tutorial

This guide provides instructions on how to remove and replace the spark plugs of the Jeep Compass 2.4L. First, open the bonnet of the vehicle and start by removing the upper plastic protective cover; then disconnect the electrical connectors of the coils located on all the spark plugs, as shown in the video.

Now use a socket wrench with an extension to unscrew and remove all the spark plugs, replacing them with new original ones; screw them in by hand and then tighten gently with a wrench, refitting the spark plug connectors and starting the engine!


Posted on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Jeep Compass 2.4 MK1
How to Replace the Spark Plugs on a Jeep Compass 2.4 MK1
Jeep Compass (2006-2016 / MK 49, MK 1) Here’s how to replace the spark plugs on a Jeep Compass 2.4: ensure the new spark plugs are suitable for this engine, which must be completely cold f…
How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
How to Reset the Service Light on Jeep Compass
How to Reset the Service Light on Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you can see how to reset the maintenance light on a Jeep Compass by following a few simple steps for proper vehicle managemen…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos