|
Do it yourself
| |||
| ||||
How to Replace the Spark Plugs on a Jeep Compass 2.4 MK1
Model: Jeep Compass
MK 49, MK 1
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
Here’s how to replace the spark plugs on a Jeep Compass 2.4: ensure the new spark plugs are suitable for this engine, which must be completely cold for work. Disconnect the negative terminal of the battery and remove the engine cover. Work on one coil at a time to avoid mixing up the leads. Disconnect the electrical connector; some connectors have a red tab that must be lifted before pressing the main latch. Unscrew the retaining screw holding the coil and pull it out of its well. Using a socket with an extension, unscrew the spark plug counterclockwise and extract it without dropping it. Install the new spark plug in the well, preferably by hand to avoid cross-threading, then tighten with a torque wrench set to 20 Nm. Refit the coil in the well, replace the retaining screw, reconnect the electrical connector, repeat for the other spark plugs, then reassemble the engine cover and reconnect the negative battery cable.
Posted on 26 May 2026 by ScegliAuto
Related tutorials
Jeep Compass
(2006-2016 /
MK 49, MK 1)
This guide provides instructions on how to remove and replace the spark plugs of the Jeep Compass 2.4L. First, open the bonnet of the vehicle and sta…
Jeep Compass
(2006-2016 /
MK 49, MK 1)
Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
Jeep Compass
(2006-2016 /
MK 49, MK 1)
The cigarette lighter fuse on your Jeep Compass is located inside the fuse box. The fuse box is situated within the engine bay, near the battery. To …
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.090
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |