Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cover Panel on a Cherokee

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Door trim panel

How do you remove the cover panel on a Cherokee car door? Remove the panel with all its parts, let's see. Using a screwdriver, unscrew the securing screws located under the handle, remove the screw cover caps on the door opening lever and across the panel. With the help of two screwdrivers, unscrew the screws on the door panel. Detach the panel from above the door (disconnect the electrical connectors from the top of the cover panel). Carry out the desired maintenance inside the door. After maintenance, refit the panel with all its parts. Replace the cover panel if damaged.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Cherokee
How to Remove the Door Panel on a Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) Removing the door panel of a Cherokee? This operation is not too complex; here’s how to remove the front panel. Unscrew the screws in the space of th…
Replace the Valve Cover Gasket on a Jeep Cherokee
Replace the Valve Cover Gasket on a Jeep Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) This guide provides the main instructions for removing and replacing the valve cover gasket on a Jeep Cherokee. First, open the bonnet and start by r…
Removing the Rear Door Panel of a Jeep Cherokee
Removing the Rear Door Panel of a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, you will learn how to remove the rear door panel of a fourth-generation Jeep Cherokee in simple steps. First, open the rear door and r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos