Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Door trim panel

Remove the plastic cover near the handle using a plastic trim tool or a small flat screwdriver. Unscrew the now exposed screw. Using the trim tool again, detach the window switch panel and disconnect the connector. At this point, remove the plastic cover and unscrew the screws underneath. Now, using one or two plastic trim tools or small flat screwdrivers, pry along the joint line between the panel and the door body to detach it from the clips. Disconnect the connectors and you're done.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Panel of a Jeep Cherokee
Removing the Rear Door Panel of a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, you will learn how to remove the rear door panel of a fourth-generation Jeep Cherokee in simple steps. First, open the rear door and r…
How to Remove the Door Panel and Handle of the Jeep Cherokee
How to Remove the Door Panel and Handle of the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) These brief steps will show you how to remove and replace the door panel and handle of the Jeep Cherokee. First, open the front door and begin to dis…
Removing the Rear Door Panel of the Jeep Cherokee XJ
Removing the Rear Door Panel of the Jeep Cherokee XJ
Jeep Cherokee (1984-2001 / XJ, MK 2) This guide shows you how to remove and replace the rear door panel of the Jeep Cherokee XJ, first generation. First, open the rear door and start by …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos