Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Service Light on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

In this simple video tutorial, you will learn how to reset the service light for routine maintenance on a Jeep Renegade. Get inside the car and turn on the ignition by pressing the start button: then, using the arrow buttons on the steering wheel, scroll through the menu until you reach the maintenance option. Press the brake pedal five times to perform the reset: now turn off the ignition. You can now restart the vehicle by pressing the clutch, and the routine maintenance light will have been reset!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on a 2016 Jeep Renegade
Resetting the service light on a 2016 Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to reset the service light on a 2016 Jeep Renegade. It is a very simple DIY operation that takes just a few minutes. It should be…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button once, activating the instrument…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button, which will turn on the instrum…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos