Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Wiper Motor from a Jeep Cherokee

Model: Jeep Cherokee MK 2, XJ - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Power window motor

See other generations:
Video tutorial

Start by removing the wipers, detaching them from their mount using a flathead screwdriver, then pull them off. Next, you will need to remove the grille located between the bonnet and the windscreen by unscrewing and removing the screws that secure it, then take it out of its housing.

This will give you access to the wiper motor.

Proceed to unscrew the screws that secure the wiper motor supports to the frame. Then, unscrew and remove the bolt that secures the motor, and disconnect the connector attached to it. Once this step is completed, the motor will no longer be secured to the vehicle, and you can extract it. This will successfully complete the disassembly.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Jeep Cherokee (2013-2023 / KL, MK 5) In this short and simple video, you will see the steps to dismantle and replace the wiper blades on the Jeep Cherokee. First, move to the front of yo…
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, you will learn the main steps to remove and replace the timing belt on a Jeep Cherokee with a 2.0 Multijet engine. First, lift the veh…
Jeep Cherokee (2013-2023 / KL, MK 5) Learn how to remove the original radio from a Jeep Cherokee. First, use a plastic lever to remove the air vent panel (disconnect the power connectors…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Warning Light on the Hyundai I10

The tyre warning light on the instrument panel of your Hyundai I10 (third series) alerts you when there is a puncture or when the tyres are inflated to the wrong pressure. If it lights up accidentally, you can reset it manually by following these steps. Once the instrument panel is on, press the directional button located on the right side of the steering wheel and find the tyre pressure display screen. Finally, press and hold the "OK" button for a few seconds and select the "Set" option to complete the reset of the light.

Watch the video!


by ScegliAuto

More videos