Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Gear Knob on Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Shift knob

Today, you will learn about a lesser-known operation that is extremely simple on this model of car. To remove and replace the gear knob (manual gearbox) on a Jeep Wrangler, simply pull it upwards while slightly rotating it in both directions. The only requirement is to have a bit of strength. Fitting the new knob is even easier: just insert it from the correct side and push it gently until you hear a slight "click", indicating it is properly seated.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the gear shift knob of the Jeep Wrangler JK
How to remove the gear shift knob of the Jeep Wrangler JK
Jeep Wrangler (2007-2018 / MK 3, JK) Removing the gear shift knob of your Jeep Wrangler JK is really simple and if you want to complete the operation in question in a few seconds, just f…
How to Remove the Gear Knob of the Jeep Wrangler?
How to Remove the Gear Knob of the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To remove the gear knob of the Jeep Wrangler, you need to use a flat screwdriver. With this, detach the chrome cover located just below the gear knob…
How to Replace the Gear Knob on a Jeep Wrangler
How to Replace the Gear Knob on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the gear knob on a Jeep Wrangler, grasp the knob and rotate it counterclockwise, using a spanner if necessary. Once the knob has been unsc…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos