Do it yourself
Frequently asked questions about cars and motorcycles

Door Panel Replacement on Jeep Wrangler

Model: Jeep Wrangler MK 2, TJ - Years 1997-2007
Part: Door trim panel

Removing the door panel on this model of car is really simple. Remove the window winder by prying it off with a small flat screwdriver and releasing the metal clip present. Unscrew the side screws on the central handle and remove it, then unscrew all the screws located at the rear of the door panel and in the side area, which can only be accessed by opening the door. Done! At this point, you can simply pull the panel off by hand, or perhaps help yourself with a flat screwdriver or a plastic wedge. For fitting a new panel, proceed in reverse.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2007-2018 / MK 3, JK) Let's remove the right front door panel on a Jeep Wrangler. Disconnect the battery terminals located in the engine bay, and using a screwdriver, unsc…
Jeep Wrangler (1997-2007 / MK 2, TJ) This guide shows you how to remove and replace the external door handle on a Jeep Wrangler by following these simple steps. First, open the front doo…
Jeep Wrangler (2007-2018 / MK 3, JK) To remove the door panel on a Jeep Wrangler, unscrew the screws securing the trim on the armrest, then remove it and unscrew the screws underneath. O…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos