Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Battery on Jeep Cars

Model: Jeep Jeep Various
Part: Key

As shown at the beginning of the video, slide the small button on the remote to extract the manual spare key. Now, using the same key or a small flat screwdriver, pry in the slot of the remote to split it in two halves. Voila! At this point, you will see the battery in front of you. Use the small flat screwdriver again to remove it from its housing and insert the new battery you purchased, which is equivalent to the original. Reassemble the remote and insert the manual spare key, and you are done. Good luck!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Uconnect system in a Jeep?
How to reset the Uconnect system in a Jeep?
Jeep Jeep Various Uconnect is the modern multimedia entertainment system installed in new Jeep vehicles. Like all electronic systems, Uconnect can experience minor iss…
How to know the fuse diagram of a Jeep Liberty
How to know the fuse diagram of a Jeep Liberty
Jeep Jeep Various The fuse box located inside the cabin of a Jeep Liberty vehicle has fuses assigned to: horn, cigarette lighter, high beams, low beams, fog lights, tu…
Where to Find the OBD2 Port on the Jeep Liberty
Where to Find the OBD2 Port on the Jeep Liberty
Jeep Jeep Various In this new guide, we will help you find the OBD2 port located inside the cabin of your 2012 Jeep Liberty. First of all, ensure the vehicle is parked…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos