Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb on a Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Headlight bulb

In this video, we will see how to replace the dipped beam bulb on a 2014 Jeep Cherokee. Lifting the bonnet, you will notice the rear cover of the headlamp: this can be removed by reaching in from above, through the engine bay, or by removing the wheel arch liner and accessing from below. Choose the method you are most comfortable with. To remove the round cover, simply unscrew it a bit. Similarly, extract the connector where the bulb is inserted and remove the bulb from the connector. Proceed in reverse until fully reassembled. If the bulb still does not work, it means you need to replace the fuse.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb on a Jeep Cherokee
Replacing the Front Headlamp Bulb on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Today, learn how to remove and replace the front headlamp bulb on a fourth-generation Jeep Cherokee in simple steps. First, unscrew the screws on the…
How to Replace the Headlamp Bulb on a Jeep Cherokee 5
How to Replace the Headlamp Bulb on a Jeep Cherokee 5
Jeep Cherokee (2013-2023 / KL, MK 5) Follow this brief and simple guide to remove and replace the dipped beam bulb of the front headlamp on the fifth generation Jeep Cherokee. First, tur…
Replacing the Front Headlamp Bulb of the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Here’s how to replace the front headlamp bulb in a Jeep Cherokee. First, turn the corresponding front wheel inwards towards the headlamp where the bu…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos