Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Dashboard Speakers on Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Speaker

Video tutorial

In this video, you will learn how to remove and replace the dashboard speakers on a Jeep Renegade in simple steps. Get inside the vehicle and use a very thin plastic lever; then remove the speaker grilles located on the dashboard, as shown in the video.

At this point, unscrew the fixing screws of the speakers using a T25 Torx key; then, simply remove the speakers by disconnecting the electrical connector located beneath the speaker housing, and replace them with the new ones, following the video to the end!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Renegade Speaker Replacement
Renegade Speaker Replacement
Jeep Renegade (2014-2026 / MK 1, BU, 520) Do you want to remove the speakers from the Jeep Renegade? Here's how to take them out from inside the door panel. Disconnect the battery terminals l…
Guide to replacing the speakers in the Jeep Renegade
Guide to replacing the speakers in the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this guide we will see the main instructions on how to disassemble and replace the front door speaker of the Jeep Renegade. First, we open the fro…
How to Reset the Tyre Light on a Jeep Renegade
How to Reset the Tyre Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you can start, inflate all the tyres on your Jeep Renegade to 4 bar. Next, sit in the driver's seat to bring up the tyre screen on the instrum…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos