Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on a Jeep Renegade?

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

Video tutorial

To reset the tyre pressure warning light on a Jeep Renegade, turn on the instrument cluster to check the specific menu for which wheel needs inflation. Once identified, inflate the tyre to the recommended pressure.

This pressure value is found on the sticker attached to the driver's door pillar. After all tyres are at the correct pressure, drive for a short distance so the sensor can read the new value and turn off the warning light.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Light on a Jeep Renegade
How to Reset the Tyre Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you can start, inflate all the tyres on your Jeep Renegade to 4 bar. Next, sit in the driver's seat to bring up the tyre screen on the instrum…
How to Reset the Tyre Pressure Light on the Jeep Renegade
How to Reset the Tyre Pressure Light on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Follow these steps to reset the tyre pressure light on the Jeep Renegade; before performing the reset, ensure that all four tyres are at the correct …
How to Reset the Tyre Pressure Light on the Jeep Renegade
How to Reset the Tyre Pressure Light on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this short and simple guide, we will see the procedure necessary to reset the tyre pressure light on the first series Jeep Renegade; before starti…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos