Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Cabin air filter

In this tutorial, we will see how to replace the cabin air filter in the Jeep Compass, a very simple and quick operation. The filter is located behind the glove compartment on the passenger side, so first, you will need to remove the corresponding drawer. To do this, remove the side panel and unscrew the indicated screw. Next, slightly move the lower carpet and unscrew the two hidden screws. Finally, open the drawer, unscrew the last three screws, and remove the bracket located right in front of the door. At this point, you can proceed with replacing the filter, following the reverse procedure to reassemble everything.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Jeep Compass
How to Replace the Cabin Filter on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) In this video tutorial, see how to replace the cabin filter on a Jeep Compass by following simple steps: first, purchase a new cabin filter; next, ge…
How to Replace the Cabin Filter of the 2016 Jeep Compass
How to Replace the Cabin Filter of the 2016 Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) If you own a 2016 Jeep Compass and want to learn how to correctly replace the cabin air filter, carefully read the instructions below and then put th…
How to Change the Cabin Filter on a Jeep Compass?
How to Change the Cabin Filter on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) In this video tutorial, you will learn how to remove and replace the cabin filter or pollen filter of the Jeep Compass. First, get inside the vehicle…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos