Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Jeep Compass?

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Cabin air filter

As shown in this tutorial, replacing the cabin filter in the Jeep Compass is a very simple and quick task. First, go to the passenger side, then open the glove compartment and empty it. Next, grasp the left wall, push it inwards, and completely separate the glove compartment from the dashboard. At this point, you can open the long rectangular door by unlocking the clips, remove the old filter, and clean the inside of the housing of any residue. To install the new filter and reassemble everything, simply follow the reverse procedure.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Jeep Compass
How to Replace the Cabin Filter on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) In this video tutorial, see how to replace the cabin filter on a Jeep Compass by following simple steps: first, purchase a new cabin filter; next, ge…
How to Replace the Cabin Filter of the 2016 Jeep Compass
How to Replace the Cabin Filter of the 2016 Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) If you own a 2016 Jeep Compass and want to learn how to correctly replace the cabin air filter, carefully read the instructions below and then put th…
How to Change the Cabin Filter on a Jeep Compass?
How to Change the Cabin Filter on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) In this video tutorial, you will learn how to remove and replace the cabin filter or pollen filter of the Jeep Compass. First, get inside the vehicle…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos