Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : How to change the cabin air filter on the Jeep Compass

Jeep Compass - Video tutorial

Model: Jeep Compass 552, MK 2 - Years 2016-2024
Part: Cabin air filter
Operation: How to change the cabin air filter on the Jeep Compass

In today's video tutorial we will see how to remove and replace the passenger compartment air filter of the Jeep Compass, following these simple steps. First we get on board the car and start opening the glovebox; after which we remove the plastic cover and unscrew the screws of the drawer to remove it, disconnecting the electrical connector of the light bulb. At this point we find on the back the cover of the filter box, which we are going to remove; remove the pollen filter and replace it with the new one, inserting it in the correct direction (indicated with arrows printed on the filter).


Posted on 23 April 2024 by ScegliAuto



Jeep Compass air conditioning filter replacement
Jeep Compass (2006-2016 / MK 49, MK 1) Jeep Compass cabin air filter replacement? Let's see how the air filter is removed. We open the glove box, unhook the guides on the side of the plast
How do you change the pollen filter on the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) Today we will see, in this video tutorial, how to remove and replace the pollen filter or the cabin air filter of the Jeep Compass. First we get on b
How to replace the cabin filter on the 2016 Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) If you own a 2016 Jeep Compass and want to find out how to replace the cabin air filter correctly, you just have to read the instructions described b

    Frequently Asked Questions

    • Compass 2016-2025 - Where is the cabin filter located in a Jeep Compass? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos