Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Service on the Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Warning light – error code

In this tutorial, you will see how to reset the oil service on the Jeep Grand Cherokee, a very simple operation to follow only after changing the oil and the related filter. To do this, turn on the ignition, not the engine, then press the accelerator pedal fully down five times in quick succession. Next, turn off the ignition, press the brake pedal, and start the vehicle, checking that the procedure has been successful. If not, repeat the operation ensuring you press the accelerator fully and complete it within 10 seconds.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) In this tutorial we can see how to reset the oil service in the Jeep Grand Cherokee, an extremely simple and quick operation, to be carried out only …
Jeep Grand Cherokee (2021-2026 / MK 5, WL) In this tutorial, you will see how to reset the oil service light on the Jeep Grand Cherokee, a very simple and quick operation to perform only after…
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) .. In this tutorial, you will see how to reset the oil service on the Jeep Grand Cherokee, a very simple and quick operation to perform.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos