Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil service on the Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK, MK 3, WH - Years 2004-2010
Part: Service warning light

In this tutorial, you will see how to reset the oil service on the Jeep Grand Cherokee, a very simple and quick operation to perform only after completing the required maintenance work, including changing the oil filter. First, turn on the ignition, then press the accelerator pedal fully three times in quick succession. Once done, switch off the ignition, turn it on again, and check that the procedure has been successful. If not, repeat the operation, ensuring you press the accelerator within about 10 seconds.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service on a Jeep Grand Cherokee?
How to Reset the Oil Service on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) As shown in this tutorial, resetting the oil service on a Jeep Grand Cherokee is a very simple and quick operation. Before proceeding, ensure that yo…
How to reset the service on the Jeep Grand Cherokee?
How to reset the service on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2021-2026 / MK 5, WL) In this tutorial, we will see how to reset the service on the Jeep Grand Cherokee, a very simple and quick operation that should be done only after c…
How to reset the oil service in the Jeep Grand Cherokee?
How to reset the oil service in the Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) .. In this tutorial, we can see how to reset the oil service on the Jeep Grand Cherokee, a very simple and quick operation to be done.. …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos