Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Headlight bulb

In this tutorial, you will learn how to remove and replace the xenon headlight bulb on a Jeep Grand Cherokee. First, open the bonnet and start by removing the air filter box (only if you are replacing the bulb on the driver’s side); then remove the plastic cover and disconnect the electrical connector of the bulb along with the bulb holder, as shown in the video. At this point, replace the bulb with a new one of the correct type; insert it into the headlamp unit and reassemble everything, following the video to the end!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Jeep Grand Cherokee?
How to Replace the Front Headlamp Bulb on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) To replace the front headlamp bulb on a Jeep Grand Cherokee, open the bonnet to access the rear of the headlamp corresponding to the bulb that needs …
How to Replace the Front Headlamp Bulb on a Jeep Grand Cherokee
How to Replace the Front Headlamp Bulb on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the front headlamp bulb on a Jeep Grand Cherokee, open the bonnet to access the screws located inside the engine bay. Inside the headlamp,…
How to replace the front headlamp bulb on the Jeep Grand Cherokee?
How to replace the front headlamp bulb on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the front headlamp bulb on the Jeep Grand Cherokee, there are two methods: the first, simpler method, involves removing the circular cover…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos