Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Driveshaft of the Jeep Wrangler Rubicon?

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Axle shaft

To replace the front driveshaft of the Jeep Wrangler, lift the vehicle to access the components underneath. You will need to remove the bolts securing the driveshaft to its housing. Once all the bolts are removed, you can disengage the driveshaft from its housing and replace it with a new spare part. This can then be inserted into its place and secured with the bolts, ensuring the vehicle operates correctly after installation.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Jeep Wrangler 4
How to replace the cabin air filter of the Jeep Wrangler 4
Jeep Wrangler (2018-2026 / JL, MK 4) If you do not know what steps you need to take to replace the air filter inside the cabin of your Jeep Wrangler Mk4, do not worry because in the foll…
How to Install Doors on a Jeep Wrangler
How to Install Doors on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Want to install the doors on your Wrangler? Let's see how to fit the doors on a Jeep Wrangler. Insert the metal door into the hinge fixed to the Jeep…
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before you begin, sit in the driver's seat of your Jeep Wrangler. Start by adjusting the tyre pressures according to the recommended values indicated…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos