Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Service on a 2016 Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Service warning light

Insert the ignition key and turn on the ignition, press the buttons with the up or down arrow symbol located on the left side of the steering wheel controls until "Vehicle Information" appears. At this point, press and hold the "OK" button located on the left side of the steering wheel controls, and while holding it, press the accelerator pedal with your right foot, performing two complete presses in sequence. Only after completing this last operation, release the "OK" button. The service setting will now have been changed. You can verify the actual reset of the service by switching off and then on the ignition.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Jeep Cherokee
How to Reset the Service Light on Jeep Cherokee
Jeep Cherokee (2002-2007 / KJ, MK 3) In this video tutorial, see how to manually reset the service light on the Jeep Cherokee. In the central console, above the climate control buttons, …
Resetting the service light on the Jeep Grand Cherokee.
Resetting the service light on the Jeep Grand Cherokee.
Jeep Cherokee (2008-2012 / MK 4, KK) After replacing the engine oil of the Jeep Grand Cherokee, we need to proceed with resetting the control system, which displays a reminder on the ins…
How to Reset the Service Light on a Jeep Cherokee
How to Reset the Service Light on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In today's video, we will see how to reset the expired service warning on a Jeep Cherokee. This operation is necessary after routine maintenance, suc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos