Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gearbox Oil in a Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Transmission fluid

See other generations:
Video tutorial

To replace the gearbox oil in a Jeep Cherokee, lift the vehicle to access the underside of the engine bay. There will be a protective panel that needs to be removed by loosening the bolts underneath and inside the wheel arches. Once this panel is completely removed, loosen the bolt securing the gearbox oil drain plug; the oil will be collected in a suitably positioned container.

You can refill through the same hole using a syringe and a tube.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

Where is the battery located in the Jeep Grand Cherokee?
Where is the battery located in the Jeep Grand Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) The Jeep Grand Cherokee, unlike other models in the same category, has the battery located in a different position. Specifically, the battery of the …
Where is the fuse box located in the Jeep Cherokee
Where is the fuse box located in the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) If you own a Jeep Cherokee and want to find out where the fuse box is located in the cabin, all you have to do is follow the procedure described in t…
Where is the fuse box for the engine of the Jeep Cherokee located?
Where is the fuse box for the engine of the Jeep Cherokee located?
Jeep Cherokee (2013-2023 / KL, MK 5) To locate the fuse box of the engine of your third edition Jeep Cherokee, you must follow the steps described in the following guide. First of all, t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos