Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Car Radio

Model: Jeep Grand Cherokee WH, WK, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car stereo

See other generations:
Video tutorial

This guide illustrates how to remove or replace your car radio. First, use the appropriate tool to remove the cover surrounding the radio, including the two central air vents.

Under the removed cover, you will find screws; unscrew the four upper screws securing the radio. After removing the four screws, simply slide the radio out, being careful of the connectors still attached.

Once the radio is repaired or replaced, follow the reverse steps to reassemble everything.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacing the Uconnect Multimedia System and Radio in a Jeep Grand Cherokee
Replacing the Uconnect Multimedia System and Radio in a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) The instructions in this guide will illustrate the procedure for removing and replacing the Uconnect multimedia system and radio in a Jeep Grand Cher…
How to Remove the Original Radio from the Jeep Grand Cherokee MK1
How to Remove the Original Radio from the Jeep Grand Cherokee MK1
Jeep Grand Cherokee (1992-1998 / ZJ, MK 1, ZG) In this short video, we will see how to remove the original radio from the 1996 first-generation Jeep Grand Cherokee in simple and quick steps. First…
What is the radio code for a Jeep Grand Cherokee and how to enter it?
What is the radio code for a Jeep Grand Cherokee and how to enter it?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) After replacing the battery in your Jeep Grand Cherokee, the radio may reset and lock. To unlock it, you need to enter the unlock code. Start by sitt…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos