Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Door panel removal instructions

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 3, KJ - Years 2002-2007
Part: Door panel
Operation: Door panel removal instructions

Start by removing the screw caps and the screws themselves in correspondence with the external rearview mirror, inside the opening handle and in the glove compartment on the armrest; therefore lever along the edges to release the pressure locks without damaging them and slightly move the panel away from its seat, then unhook the tie rod of the lock and the sockets. If any of the snap fasteners get stuck in the door holes, they must be removed and attached to the panel before reinstalling. If the window lifter mechanism has to be replaced, simply unscrew the relative fixing pins, loosening the window fixing claws as well.


Posted on 31 July 2023 by ScegliAuto



How to remove the door panel on Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) Let's see how to remove the Cherokee door cover panel to access it or to replace it. We disconnect the electrical terminals of the battery. Using a s
Jeep cherokee how to remove the door panel
Jeep Cherokee (1984-2001 / XJ, MK 2) Remove the door panel of a Cherokee? Not too complex operation, let's see how the front panel is removed. We unscrew the screws placed in the space o
Remove the cover panel on the Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) Remove the cover panel on a Cherokee car door? We disassemble the panel with all the pieces, let's see. Using a screwdriver, unscrew the tightening s

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos