Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Window Regulator on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WH, WK, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Side window

See other generations:
Video tutorial

If you need to replace the window regulator mechanism on your vehicle, specifically the frame and electric motor, follow the instructions below. First, remove the door panel by taking out all the retaining clips and screws located beneath the opening lever.

Then disconnect the lock release cable connector and the electrical terminals. Remove the speaker and the protective plastic underneath.

Next, slide out the glass run frame and the associated motor, and proceed with the replacement.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Remove the Window Switch Panel on a Jeep Grand Cherokee
How to Remove the Window Switch Panel on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before you begin, open the driver's door of your Jeep Grand Cherokee. Using a thin but sturdy tool as a lever, start by unclipping the window switch …
How to Change the Tyre on the Jeep Grand Cherokee
How to Change the Tyre on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To change the tyre on the Jeep Grand Cherokee, start by putting the suspension in tyre change mode and engaging the handbrake. Go to the rear of the …
How to Locate the Fuses and Understand Their Diagrams in a Jeep Grand Cherokee
How to Locate the Fuses and Understand Their Diagrams in a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) The first fuse panel in a Jeep Grand Cherokee can be found inside the vehicle, located behind the dashboard at the bottom left of the steering wheel,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos