Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Locate the Fuses and Understand Their Diagrams in a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK, MK 3, WH - Years 2004-2010

The first fuse panel in a Jeep Grand Cherokee can be found inside the vehicle, located behind the dashboard at the bottom left of the steering wheel, on the driver's side. This panel contains fuses for: audio, sunroof, door locks, air conditioning, parking assist, FDCM, cigarette lighter, interior lights, tyre pressure sensor, window lifters, steering lock, windscreen wipers, ESP/ABS, mirror control, fog lights, brake lights, etc. In the engine compartment, there are two fuse panels, both located on the right side near the battery; these contain: cigarette lighter, ignition coil, screen demister, ABS pump, fuel pump, wiper motor, TCM, brake lights, ABS valve, injectors, horn, radiator, etc.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlamp bulb on a Jeep Grand Cherokee?
How to replace the rear headlamp bulb on a Jeep Grand Cherokee?
Jeep Grand Cherokee (1992-1998 / ZG, MK 1, ZJ) To replace the rear headlamp bulb on a Jeep Grand Cherokee, open the boot lid so that the screws securing the rear headlamp can be loosened. Once the…
How to Remove the Window Switch Panel on a Jeep Grand Cherokee
How to Remove the Window Switch Panel on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before you begin, open the driver's door of your Jeep Grand Cherokee. Using a thin but sturdy tool as a lever, start by unclipping the window switch …
How to Install LED Headlights in the Jeep Grand Cherokee
How to Install LED Headlights in the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In today's video, see how to replace the original bulbs in the Jeep Grand Cherokee. We will switch from halogen bulbs to LED ones. Remember to purcha…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos