Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee MK 2, WJ - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Starter motor

See other generations:
Video tutorial

To replace the starter motor on a Jeep Grand Cherokee, open the bonnet to access the components inside the engine bay. The starter motor is located to the left of the engine block, directly beneath the battery. Unscrew the bolts securing the starter in its housing and disconnect the wires and connectors so it can be replaced with a new part.

After installing the new starter, you can start the car to check that the device works.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Replacing the Starter Motor on Jeep Grand Cherokee
Replacing the Starter Motor on Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) In this video tutorial, learn how to remove and replace the starter motor on a Jeep Grand Cherokee, as well as on other models from the manufacturer.…
Replacing the Rear Wiper Motor on the Jeep Grand Cherokee 1
Replacing the Rear Wiper Motor on the Jeep Grand Cherokee 1
Jeep Grand Cherokee (1992-1998 / ZJ, MK 1, ZG) In this guide, follow the procedure to remove and replace the rear wiper motor on the first series Jeep Grand Cherokee. First, open the boot and star…
Removing the Cabin Heater Fan on a Jeep Grand Cherokee
Removing the Cabin Heater Fan on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this video tutorial, you will see instructions on how to remove and replace the cabin heater fan on a 2012 Jeep Grand Cherokee. First, access the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos