Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Control Arms on a Jeep Compass?

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Control arm

To replace the steering control arms on a Jeep Compass, first loosen all the bolts securing the wheel corresponding to the control arm to be replaced. Once the wheel has been removed, loosen the nut securing the front pin of the control arm and tap it gently with a hammer to dislodge it. Then, remove the rear pin of the control arm by simply rotating it. Once the old control arm has been removed, replace it with a new spare part and reinstall the corresponding wheel.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Jeep Compass
Replacing Headlight Bulbs on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Need to replace damaged front headlight bulbs on a Jeep Compass? Here’s how to do it. Open the bonnet by pulling the lever located at the bottom righ…
How to Replace the Headlight Bulbs on a Jeep Compass?
How to Replace the Headlight Bulbs on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the front headlight bulbs on a Jeep Compass, lift the bonnet to access the rear of the headlamp. There will be a plastic cover that needs …
How to Replace the Position Lights on Jeep Compass?
How to Replace the Position Lights on Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the position lights on the Jeep Compass, remove the internal cover cap of the headlamp to access the bulb. Next, disconnect the bulb from …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos