Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Jeep Cherokee

Model: Jeep Cherokee MK 4, KK - Years 2008-2012
Part: Service warning light

If the oil change light appears despite having already changed the fluid and filter, you must perform a manual reset using the car's controls. The first step requires inserting the key to the second position to turn on the ignition, then press the accelerator pedal three times in quick succession. Finally, turn off the ignition and remove the key. The reset is complete, but to confirm the light has been cleared, you need to restart the car. This simple operation can be performed at any time without issues.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Jeep Cherokee
How to Reset the Oil Change Light on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Resetting the oil change light on a Jeep Cherokee is a routine operation that should be performed after every oil change and filter replacement. This…
How to Reset the Oil Change Light on Jeep Cherokee
How to Reset the Oil Change Light on Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) .. In this video tutorial, you will see how to reset the oil change light on a Jeep Cherokee. First, perform the oil and filter change. After.. …
Resetting the Oil Change Warning Light on the Jeep Cherokee (2018)
Resetting the Oil Change Warning Light on the Jeep Cherokee (2018)
Jeep Cherokee (2013-2023 / KL, MK 5) Today, follow these instructions to reset the service warning light for the oil change on the 2018 Jeep Cherokee, fifth generation. First, get inside…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos