Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : How to replace the cabin filter in the Jeep Wrangler?

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Cabin air filter
Operation: How to replace the cabin filter in the Jeep Wrangler?

In this video we can see how to replace the cabin filter in the Jeep Wrangler, a very simple and fast operation. The filter is positioned behind the glove compartment on the passenger side, therefore, the drawer must be removed to access it. To do this, let's open it and press the two internal corners so that the pins come out, put it on the ground and open the door containing the filter. If this is covered as shown in the video, turn on the panel and activate the fan. Finally, we insert the two new filters and reassemble everything following the reverse procedure.


Posted on 6 August 2022 by ScegliAuto



How to replace the cabin filter in a Jeep Wrangler JL
Jeep Wrangler (2018-2024 / JL, MK 4) In this video tutorial we can see how it is possible to replace the cabin filter in a Jeep Wrangler JL, following some basic steps: the first thing t
How to replace the cabin filter in the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In this tutorial we can see how to replace the cabin air filter in the Jeep Wrangler, a very simple and fast operation. The filter of this model is p
How do you replace the cabin filter of the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) Replacing the cabin filter of the Jeep Wrangler is done by opening the glove box located on the passenger side: after the glove box has been opened,

    Frequently Asked Questions

    • Wrangler 2007-2018 - Where is the cabin air filter on the Jeep Wrangler Unlimited? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos