Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Jeep Wrangler?

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, we can see how to replace the cabin filter in the Jeep Wrangler, a very simple and quick operation. First of all, go to the passenger side, then open the glove compartment, release the upper fastening clip and lower the drawer.

Next, locate the long rectangular door, open it and remove the old filter. At this point, all that remains is to clean the inside of the housing from any dirt residue, insert the replacement in the correct direction and reassemble everything following the exact reverse procedure.


Posted on 16 November 2025 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Jeep Wrangler 4
How to replace the cabin air filter of the Jeep Wrangler 4
Jeep Wrangler (2018-2026 / JL, MK 4) If you do not know what steps you need to take to replace the air filter inside the cabin of your Jeep Wrangler Mk4, do not worry because in the foll…
How to replace the cabin air filter of the 2013 Jeep Wrangler
How to replace the cabin air filter of the 2013 Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) If you need to replace the cabin air filter in your Jeep Wrangler on your own, then all you have to do is pay attention to the following guide and fo…
How to Replace the Cabin Filter of the Jeep Wrangler?
How to Replace the Cabin Filter of the Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the cabin filter of the Jeep Wrangler, open the glove compartment on the passenger side by detaching the side clips. This allows you to co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos