Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Change Light on the Jeep Grand Cherokee Mk4

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Service warning light

This guide shows how to reset the engine oil change light on the Jeep Grand Cherokee Mk4. To perform this operation, turn on the vehicle's instrument cluster and use the arrows on the steering wheel. Use the arrows to scroll through the menu until you reach the vehicle parameters tab. Use the left and right arrows to navigate to the engine oil life tab. Press and hold the "OK" button and wait for the reset operation to complete. Turn off and then turn on the instrument cluster to check that the procedure has been completed correctly.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Jeep Grand Cherokee
How to Reset the Oil Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before starting, sit in the driver's seat of your Jeep Grand Cherokee. Turn the key in the ignition switch without activating the instrument cluster.…
How to Reset the Oil Light on a 2012 Jeep Grand Cherokee
How to Reset the Oil Light on a 2012 Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) If the engine oil light on your 2012 Jeep Grand Cherokee Mk4 remains illuminated every time you turn on the ignition, even after servicing, follow th…
How to Reset the Engine Oil Light (Service) on Jeep Grand Cherokee
How to Reset the Engine Oil Light (Service) on Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Below are the instructions on how to reset the service light for the regular maintenance oil change on the Jeep Grand Cherokee. First, get in the veh…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos