|
Do it yourself
| |||
| ||||
How to Replace the Interior Bulbs in the Jeep Compass Mk2
Model: Jeep Compass
552, MK 2
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Video tutorial
This guide shows how to replace the interior bulbs in the Jeep Compass Mk2. Starting from the front central ceiling light, use a trim removal tool to remove the trim piece. Disconnect the electrical connector and the small bulb holders. Remove the old bulbs and replace them with new ones. To replace the bulbs in the ceiling handles, loosen the two covers at the ends of the handle to remove the support. Disconnect the electrical connector and extract the bulb holder by acting on the retaining clips. Remove the protective glass by lifting it from the opposite side of the switch; replace the bulb and reassemble everything in position. To replace the mirror lights in the sun visor, remove the outer trim piece with a trim removal tool. Remove the bulbs and install the new elements. To replace the boot light bulb, remove the assembly using a trim removal tool. After disconnecting the electrical connector and removing the protective cover of the bulb holder, replace the bulb.
Updated on 13 June 2026 by ScegliAuto
Related tutorials
Jeep Compass
(2016-2025 /
552, MK 2)
To replace the position light bulb on a Jeep Compass, loosen the screws that secure the inner cover of the wheel arch corresponding to the bulb to be…
Jeep Compass
(2016-2025 /
552, MK 2)
To replace the front headlamp bulb on a Jeep Compass, loosen the screws securing the inner wheel arch cover near the bulb that needs replacing. Once …
Jeep Compass
(2006-2016 /
MK 49, MK 1)
Need to replace damaged front headlight bulbs on a Jeep Compass? Here’s how to do it. Open the bonnet by pulling the lever located at the bottom righ…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to open the bonnet on a Volkswagen Golf?
In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |