Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuel Filler Cap on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Fuel cap

In today's video, we will see how to open the fuel filler cap on a Jeep Renegade if it is stuck. Specifically, we will look at three different methods: - the first involves (after opening the rear hatch) pulling the plastic latch located on the right, behind the courtesy light, while simultaneously pressing the fuel filler cap; - the second allows you to act from outside; you will need to reach into the gap between the wheel arch and the bodywork and manually unlock it; - the last method involves removing the inner part of the wheel arch to access it directly from the boot.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you open the fuel tank cap of the Jeep Renegade?
How do you open the fuel tank cap of the Jeep Renegade?
Jeep Renegade (2014-2023 / ) Regarding the car observable in this video, namely the Jeep Renegade, we see how to open the fuel tank cap. To be honest, there is not much to discov…
How to remove the fuel door of the Jeep Renegade
Jeep Renegade (2014-2023 / ) Today we will explain how to remove the fuel door of a Jeep Renegade. First, we need to open the front door on the driver's side and sit in the seat,…
How to open the fuel flap of the Jeep Renegade?
How to open the fuel flap of the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To open the fuel flap of the Jeep Renegade, there is no need to press any button inside the cabin to unlock the mechanism. Simply apply a light press…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos