Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on the Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

If you intend to carry out a DIY replacement of the cabin air filter on the vehicle, refer to the instructions below. The compartment containing the filter is located behind the glove box on the passenger side.

To access it, open the glove box and unclip the pins on the sides to fully tilt the glove box and remove it. Behind the glove box, there is a plastic grille that you need to lift by pulling it towards you, and behind it will be the filter that you will extract and replace with a new one that has the same specifications and is compatible with the vehicle.

Proceed to position the new filter in the housing and reassemble the glove box.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Jeep Wrangler 4
How to replace the cabin air filter of the Jeep Wrangler 4
Jeep Wrangler (2018-2026 / JL, MK 4) If you do not know what steps you need to take to replace the air filter inside the cabin of your Jeep Wrangler Mk4, do not worry because in the foll…
…
How to Replace the Cabin Filter in a Jeep Wrangler?
How to Replace the Cabin Filter in a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) In this video, see how to replace the cabin filter in a Jeep Wrangler, a very simple and quick operation. The filter is located behind the glove comp…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos