Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil service light on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Service warning light

In this tutorial, you will see how to reset the oil service light on the Jeep Compass, a very simple and quick operation. Before proceeding, ensure you have completed all required maintenance work; in this case, you will also need to replace the oil filter. Start by inserting the key and turning on the ignition, not the engine, then press the accelerator pedal fully three times in a row. Once done, start the vehicle. To check if the procedure was successful, turn off the vehicle and start it again.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Jeep Compass
How to reset the service light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) The instructions in this guide will show us how to reset the service light for the regular maintenance of the engine oil change in the Jeep Compass. …
Resetting the service light on the Jeep Compass.
Resetting the service light on the Jeep Compass.
Jeep Compass (2016-2025 / 552, MK 2) Through these brief steps, we will see how to reset the service light for the regular maintenance of the engine oil change of the Jeep Compass. First…
How to Reset the Engine Oil Light on a Jeep Compass
How to Reset the Engine Oil Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today's guide will show you how to reset the engine oil service light on a Jeep Compass. First, get into the vehicle and turn on the ignition by pres…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos