Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate the Cruise Control in the Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Checks and maintenance

To activate the standard cruise control in the Jeep Cherokee, press the activation and deactivation button for this system located on the right side of the steering wheel. You can tell if the system is activated or not by the indicator light that illuminates on the instrument panel. Then use the "set+" or "set-" button to set the speed for the cruise control, which can be adjusted later using these two buttons. Once activated and set, this electronic system, also known as cruise control, allows you to automatically regulate the vehicle's speed.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to activate and deactivate the Start&Stop system of the Jeep Cherokee
How to activate and deactivate the Start&Stop system of the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Today's steps will show us how to activate or deactivate the Start&Stop system of the Jeep Cherokee, following the instructions below. First of all, …
How to Set the Driver's Memory on the Jeep Grand Cherokee Seat?
How to Set the Driver's Memory on the Jeep Grand Cherokee Seat?
Jeep Cherokee (2013-2023 / KL, MK 5) If you own a Jeep Grand Cherokee equipped with a driver's memory seat, you can save up to two memory profiles and activate them via the switch. To se…
How to Disable Start&Stop on Jeep Cherokee
How to Disable Start&Stop on Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video tutorial, you will learn an effective method to permanently disable the start&stop system on a Jeep Cherokee from 2013 to 2020, as well…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos