Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Cabin air filter

In this tutorial, you will see how to replace the cabin filter in the Jeep Grand Cherokee, a very simple and quick operation. First, sit in the passenger seat, then open the glove compartment, unclip the cord on the right side, and by pressing both sides inward, disengage the glove compartment from the dashboard. Once done, open the long rectangular cover by unlocking the left clip and remove the old filter. Finally, clean the housing of any debris and fit the new part by following the reverse procedure.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on Jeep Grand Cherokee?
How to Replace the Cabin Filter on Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the cabin filter on the Jeep Grand Cherokee, open the glove compartment from the passenger side and push sideways so that the compartment …
How to Replace the Cabin Filter on a Jeep Grand Cherokee
How to Replace the Cabin Filter on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the cabin filter on a Jeep Grand Cherokee, open the glove compartment located on the passenger side and remove the side cords that secure …
How to Replace the Cabin Air Filter on a Jeep Grand Cherokee 4
How to Replace the Cabin Air Filter on a Jeep Grand Cherokee 4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) If you own a Jeep Grand Cherokee Mk4 and want to learn how to correctly replace the cabin air filter, follow the procedure below. First, reach the pa…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos