Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorber on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee MK 2, WJ - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Shocks

See other generations:
Video tutorial

To replace the front shock absorber on a Jeep Grand Cherokee, lift the vehicle to secure the front suspension with the spring under tension. At this point, open the bonnet and access the bolt securing the shock absorber at the top, from the position shown in the video.

Then, access the rear of the corresponding wheel, unscrewing the additional bolt that secures the shock absorber at the bottom. This will allow you to completely remove the shock absorber and replace it with a new spare part.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

What is the radio code for a Jeep Grand Cherokee and how to enter it?
What is the radio code for a Jeep Grand Cherokee and how to enter it?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) After replacing the battery in your Jeep Grand Cherokee, the radio may reset and lock. To unlock it, you need to enter the unlock code. Start by sitt…
Where to Find the Fuse Box of the 2004 Jeep Grand Cherokee
Where to Find the Fuse Box of the 2004 Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) To independently locate the fuse box in your 2004 Jeep Grand Cherokee, carefully read the following guide where we will assist you step by step. Firs…
How to Replace the Front Grille on a Jeep Grand Cherokee?
How to Replace the Front Grille on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) To replace the front grille on a Jeep Grand Cherokee, open the bonnet to access the top of the grille. Remove the fixing rivets located at the rear o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos