Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on a Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

Resetting the oil service on a Jeep Grand Cherokee is a very simple and quick operation; let’s see how to proceed in this tutorial. Before doing this, ensure you have completed all scheduled maintenance tasks.

Start by entering the cabin and turning on the ignition, but not the engine. Then, press the accelerator pedal fully three times in quick succession.

Next, turn off the ignition, turn it back on, and check that the procedure has been successful. If not, repeat the operation, aiming to complete it within about 10 seconds of turning on the ignition.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to reset the oil service light on the Jeep Grand Cherokee?
How to reset the oil service light on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2021-2026 / WL, MK 5) In this tutorial, you will see how to reset the oil service light on the Jeep Grand Cherokee, a very simple and quick operation to perform only after…
How to Reset the Oil Service Light on a Jeep Grand Cherokee?
How to Reset the Oil Service Light on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this tutorial, you will learn how to reset the oil service light on a Jeep Grand Cherokee, a very simple and quick operation to perform only after…
How to Reset the Engine Oil Light (Service) on Jeep Grand Cherokee
How to Reset the Engine Oil Light (Service) on Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Below are the instructions on how to reset the service light for the regular maintenance oil change on the Jeep Grand Cherokee. First, get in the veh…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos