Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Service warning light

In this tutorial, you will learn how to reset the oil service light on a Jeep Grand Cherokee, a very simple and quick operation to perform only after completing the required scheduled maintenance work. Start by entering the vehicle, then insert the key and turn on the instrument cluster, not the engine. Next, fully press the accelerator pedal three times in quick succession, turn off the vehicle, and start it again to check if the reset was successful. If not, repeat the process, ensuring it is completed within 10 seconds of turning on the ignition.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil service light on the Jeep Grand Cherokee?
How to reset the oil service light on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2021-2026 / MK 5, WL) In this tutorial, you will see how to reset the oil service light on the Jeep Grand Cherokee, a very simple and quick operation to perform only after…
How to reset the "Service" light on a Jeep Grand Cherokee?
How to reset the "Service" light on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To reset the "Service" light on a Jeep Grand Cherokee, start by turning on the instrument panel without starting the engine. Use the buttons on the s…
How to Reset the Engine Oil Light (Service) on Jeep Grand Cherokee
How to Reset the Engine Oil Light (Service) on Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Below are the instructions on how to reset the service light for the regular maintenance oil change on the Jeep Grand Cherokee. First, get in the veh…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos