Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Tire pressure warning light

The TPMS light is reset using the button installed on the left side of the steering wheel, after turning on the instrument cluster. Use the arrows to navigate through the various options that appear on the display in the centre of the dashboard until you reach the ones you are interested in. Confirm with the OK button on the same button panel as the arrows. First, select the 'vehicle information' option and then go to the screen where the display indicates that the tyre pressure is insufficient. From here, simply press the OK button to reset the light.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
Jeep Renegade (2014-2024 / ) On the Jeep Renegade, resetting the TPMS is done after adjusting the pressures according to the chart on the door pillar. With the Jeep Renegade stat…
How to reset the TPMS light on a Jeep Renegade
How to reset the TPMS light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) The lighting of the tire pressure warning light indicates that it is necessary to go to a workshop or a service station to inflate the tires. To adju…
How to reset the TPMS light on the Jeep Renegade
How to reset the TPMS light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) The tire pressure warning light, also known as the TPMS light, monitors the pressure of the tires on the road; in case the light activates on the car…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos