Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gearbox Oil in a Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK, MK 3, WH - Years 2004-2010
Part: Transmission fluid

To replace the gearbox oil in a Jeep Grand Cherokee, access the lower part of the engine bay where you will find the gearbox oil reservoir: by unscrewing the cap located in this position, you can drain all the used oil into a suitably positioned container. You can also unscrew the screws that secure the oil sump, removing it and pulling out the filter inside: after reinstalling the sump, you can top up through the same breather, using a pump.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Crankshaft Position Sensor in a Jeep Grand Cherokee?
How to Replace the Crankshaft Position Sensor in a Jeep Grand Cherokee?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) In this tutorial, see how to replace the crankshaft position sensor in a Jeep Grand Cherokee. First, lift the front of the vehicle, taking all necess…
How to Reset the Oil Light on a Jeep Grand Cherokee
How to Reset the Oil Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) This video shows how to reset the oil light on a Jeep Grand Cherokee produced from 2010 to 2021. The procedure is very simple and quick, taking less …
What is the radio code for a Jeep Grand Cherokee and how to enter it?
What is the radio code for a Jeep Grand Cherokee and how to enter it?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) After replacing the battery in your Jeep Grand Cherokee, the radio may reset and lock. To unlock it, you need to enter the unlock code. Start by sitt…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos