Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuel Cap of the Jeep Cherokee in an Emergency

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Fuel cap

See other generations:
Video tutorial

In this video, learn how to open the fuel cap on the Jeep Cherokee in an emergency: first, flip the rear seat down on both sides using the handle located on the upper side of the seat. Next, open the boot, detach the parcel shelf, and on the right side, you'll see a symbol with a fuel pump.

Use a flathead screwdriver to enter the notch and then open it. Behind, you'll find a green lever with the fuel pump symbol; pull it towards you, and this will allow the fuel flap to open normally.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

How to Manually Open a Capless Fuel Tank
How to Manually Open a Capless Fuel Tank
Jeep Cherokee (2013-2023 / KL, MK 5) On many modern vehicles, such as the Jeep Cherokee in the video, the fuel tank is equipped with a 'capless' system, without a screw cap. To open the …
How to Open the Fuel Flap on a Jeep Cherokee?
How to Open the Fuel Flap on a Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) In this tutorial, see how to open the fuel flap on a Jeep Cherokee, a very simple operation that is similar to the typical procedure for most vehicle…
How to Open the Fuel Filler Cap on the Jeep Cherokee?
How to Open the Fuel Filler Cap on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) In this tutorial, you will see how to open the fuel filler cap on the Jeep Cherokee, a very simple operation that follows the typical procedure for m…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos