Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How do I replace the fuel pump on the Jeep Cherokee?

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 5, KL - Years 2013-2023
Part: Fuel pump
Operation: How do I replace the fuel pump on the Jeep Cherokee?

In order to replace the fuel pump of the Jeep Cherokee you have to completely lower the rear seats and push them forward, to disconnect the connectors related to the airbags located in the rear. When these have been disconnected, it will be necessary to push the seats as far back as possible and unscrew the bolts on the side of the seats. By doing so, they can be completely removed, giving access to the lower part: here it will be necessary to lift the cover under which the pump is located and free it, unscrewing the fixing bolts and disconnecting the connectors and pipes. By doing so, you can replace it with a new spare part.


Posted on 23 March 2024 by ScegliAuto



How to disassemble the diesel pump of the Jeep Cherokee
Jeep Cherokee (2002-2007 / MK 3, KJ) How to remove the diesel pump of a Jeep Cherokee? Operation not too difficult, let's see how to do it. We lift the car onto a column bridge, locate t
How to open the fuel cap of the Jeep Cherokee in case of emergency.
Jeep Cherokee (2013-2023 / MK 5, KL) In this video, we see how to emergency open the fuel cap on the Jeep Cherokee: first, we need to fold down the rear seat, on both sides, using the ha
How to disassemble the diesel pump of the Jeep Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) Do we want to remove the fuel pump of a Jeep Cherokee? We remove the tank of the car from under the floor. We lift the car onto a column bridge and l

Other guides that may interest you

    Frequently Asked Questions

    • Cherokee 2008-2012 - How much does the diesel pump cost on the Jeep Grand Cherockee§? Read Answer

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos