Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Jeep Compass 2.4

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Fuel pump

Today's instructions will show you the steps to remove and replace the fuel pump on a Jeep Compass 2.4. First, open the rear doors and start by removing the rear seat, then take off the fuel pump cover to access it; after that, disconnect the electrical connector of the fuel level sensor and disconnect the fuel pump lines, as shown in the video. At this point, remove the fuel sender unit from the tank, replacing it with the new original one, applying the reverse procedure for reassembly!

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter on Jeep Compass, Jeep Patriot, Dodge Caliber
Replacing the Diesel Filter on Jeep Compass, Jeep Patriot, Dodge Caliber
Jeep Compass (2006-2016 / MK 1, MK 49) In this video tutorial, you will learn how to remove and replace the fuel pump on a Jeep Compass and Patriot, as well as on the Dodge Caliber. First,…
How to Replace the Water Pump in the Jeep Compass
How to Replace the Water Pump in the Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) In today's tutorial, you will see the steps to replace the water pump in the Jeep Compass. Before starting, it is advisable to wait until the engine …
Replacement of the timing belt of the Jeep Compass Multijet
Replacement of the timing belt of the Jeep Compass Multijet
Jeep Compass (2016-2025 / 552, MK 2) Let's discover the information that will allow us to dismantle and replace the timing belt of the Jeep Compass, with a diesel engine (Multijet). To a…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos