Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : How to reset the oil service in the Jeep Compass?

Jeep Compass - Video tutorial

Model: Jeep Compass MK 2, 552 - Years 2016-2024
Part: Engine oil
Operation: How to reset the oil service in the Jeep Compass?

In this tutorial, we can see how to reset the oil service in the Jeep Compass, an extremely simple and fast operation, to be performed only after completing all scheduled maintenance work. First of all, let's go inside the cabin, then insert the key, turn on the instrument panel, and press the accelerator pedal all the way down 3 times in a row. Then turn off the vehicle, start it again, and verify that the reset was successful. If not, repeat the operation, making sure to complete it within 10 seconds.


Posted on 22 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Compass 2006-2016 - How often do you change the engine oil and filter of the Jeep Compass 1.6 diesel? Read Answer
    • Compass 2016-2025 - What to do if the oil change light comes on in the Jeep Compass? Read Answer
    • Compass 2006-2016 - How much does it cost to replace the engine oil of the 1.6 diesel Jeep Compass? Read Answer
    • Compass 2006-2016 - What gradation to use for the Jeep Compass? Read Answer
    • Compass 2016-2025 - How much does it cost to service the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where do you top up the engine oil of a Jeep Compass from? Read Answer
    • Compass 2006-2016 - How much does the service cost of the Jeep Compass? Read Answer
    • Compass 2016-2025 - What is the cost for the trim of the Jeep Compass? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos